Eq Settings And Presets - DigiDesign VENUE Profile Manual

EQ Settings and Presets

Built-in parametric and Graphic EQ settings can be copied and
pasted between channels. EQ presets can also be saved and
loaded to archive and transfer settings.
Copying and Pasting EQ Settings
To copy and paste an EQ setting:
Do one of the following:
1
• To copy a parametric EQ setting, right-click the on-screen
EQ section or EQ graph (not on an encoder) and choose
Copy EQ Settings.
– or –
• To copy a Graphic EQ setting, right-click the graphic EQ
display (not on a fader) and choose Copy GEQ Settings.
EQ Reset/Copy/Paste pop-up menu
Go to the channel where you want to paste the settings.
2
Do one of the following:
3
• To paste a parametric EQ setting, right-click in the new
channel's EQ section or graph and choose Paste EQ Set-
tings.
– or –
• To paste a Graphic EQ setting, right-click in the new
channel's Graphic EQ section and choose Paste GEQ Set-
tings.
Presets for Built-In and Graphic EQ
You can store and load EQ settings to disk as Preset files. Pre-
sets can be used with built-in and plug-in EQ processors, in-
cluding the graphic EQ. Preset files can be moved between sys-
tems and used for other Shows. Presets can be accessed from
the control surface or on-screen.
Check the Factory Presets folder for preconfigured settings.
To save or load a preset:
Adjust EQ parameters as needed.
1
Click the EQ Presets icon on-screen. (The Presets icon is
2
available in the Inputs screen EQ section, and in the graphic
EQ screen for an output channel).
144 VENUE Profile Guide
Choose a Presets folder in the Folder display at the top of the
3
Presets window. If necessary, choose the appropriate Presets
folder by selecting it from the Folder pop-up menu.
For more information, see Chapter 20, "Shows and File
Management."
Presets window
EQ Presets window
Do any of the following:
4
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click
the Close box in the Presets window title bar.
• To load a preset and close the Presets window, dou-
ble-click the preset.
• To save the current EQ settings as a new preset, click New
and enter a name for the preset file.
• To cancel without changing settings, click Cancel.
To save or load a preset for the Graphic EQ:
Go to the Outputs page for the channel on which the
1
graphic EQ is assigned. If necessary, click the 31-Band Graphic
Equalizer tab to display the graphic EQ on that channel.
Click the Presets icon (above the EQ bands, next to the
2
In-Circuit button).
Choose a Presets folder in the Folder display at the top of the
3
Presets window. If necessary, choose a different Presets folder
by clicking and selecting it from the Folder pop-up menu.
Do any of the following:
4
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click
the Close box in the Presets window title bar.
• To load a preset and close the Presets window, dou-
ble-click the preset.
• To save the current graphic EQ settings as a new preset,
click New and enter a name for the preset file.
• To cancel without changing settings, click Cancel.
Presets icon