DigiDesign VENUE Profile Manual page 259

In the Connection Properties window, double-click Internet
3
Protocol (TCP/IP).
Local Area Connection Properties window
In the Internet Protocol Properties window, select "Use the
4
following IP Address" and enter the following:
• IP address: 10.0.0.2
• Subnet Mask: 255.255.255.0
• Default Gateway: (none required)
Internet Protocol Properties window
Click OK to close the Internet Protocol properties window.
5
Click OK to close the Network Connection Properties win-
6
dow.
Do one of the following depending on the configuration of
7
your network:
• If you are using a wireless network, go to "Establishing a
Wireless Connection" on page 251.
– or –
• If you are using a wired network, go to "Enabling Remote
Operation" on page 252.
To manually set the IP address on a Mac:
Launch System Preferences > Network.
1
Do one of the following:
2
• If you are connecting the computer directly to your
VENUE system, choose Ethernet from the network con-
nections services list.
– or –
• If you are connecting using a wireless router or WAP,
choose Airport from the network connections services
list.
Choose Manually from the Configure menu.
3
Enter the following:
4
• IP address: 10.0.0.2
• Subnet Mask: 255.255.255.0
• Router: (none required)
Network Preferences window
Click Apply.
5
Do one of the following depending on the configuration of
6
your network:
• If you are using a wireless network, go to "Establishing a
Wireless Connection" on page 251.
– or –
• If you are using a wired network, go to "Enabling Remote
Operation" on page 252.
Chapter 30: ECx 249