Managing Snapshots - DigiDesign VENUE Profile Manual

Do any of the following:
3
• To preview an existing Scope Set, click its name in the
Scope Sets window.
• To load the currently selected Scope Set, press Enter or
click the Close box (X) in the Scope Sets window title bar.
• To cancel without changing Recall Safe settings, click
Cancel.
Scope Sets window
See Chapter 20, "Shows and File Management" for com-
plete information on transferring system data.
Automation Safing Channels
Input Safe switches (both console and on-screen) can be set to
Automation, Solo, or Bank Safe modes. When set to act as Au-
tomation Safes, the Input Safe Switches let you suspend the ef-
fect of snapshots on all parameters of individual Input Chan-
nels and FX Returns.
You can also control channel automation safe status in the
Recall Safe tab. See "CHANNEL SAFE" on page 182.
On-screen Automation Safe button
To toggle the Safe status of an Input Channel or FX Return
directly from the channel strip:
Go to the Options page and click the Interaction tab.
1
In the Input Safe Switches section, select the Act as Automa-
2
tion Safes option.
Press the Safe switch in the Input section, or click the
3
on-screen Safe button for each of the Input Channels or FX
Returns you want to safe. The Safe switch lights solid to indi-
cate that the channel is automation safed.
You can use the Event List to be able to cycle through the
various Input Safe Switch modes using a footswitch, func-
Scope Sets
tion switch or other available trigger. See Chapter 22,
Folder selector
"Events."

Managing Snapshots

You can manage snapshots in the list by storing, locking,
clearing, duplicating, deleting, or moving them.
Storing Snapshots
You can modify the contents of an existing snapshot, over-
writing it with new settings, using the Store command. It is not
necessary to recall a snapshot to store it. Snapshots can be
stored from on-screen or from the snapshot controls on the
console. You can undo Store commands.
To store the current console state in an existing snapshot:
Set all parameters on the console as you want them to be
1
stored in the snapshot.
Select the snapshot in the on-screen Snapshot list, or turn
2
the Select knob in the Snapshots section to target a snapshot
you want to overwrite.
Click the Store button on-screen, or press the Store switch in
3
the Snapshots section.
Set the scope by doing the following:
4
• For each parameter you want to be affected when the
snapshot is recalled, click the corresponding Data Type
button so that it is scoped (displayed in red).
• For each channel you want affected when the snapshot is
recalled, click the channel fader so that it is scoped (dis-
played in red).
Locking Snapshots
Snapshots can be locked to prevent them from being acciden-
tally altered, overwritten or deleted.
Locked snapshots can be selected, recalled, moved and dupli-
cated. They cannot be overwritten, renamed, rescoped or oth-
erwise changed. New and duplicated snapshots default to un-
locked. Lock status can be changed at any time, including
while in Preview mode.
Chapter 21: Snapshots 183