Using Input Direct - DigiDesign VENUE Profile Manual

Digital Input Sources
On systems that include a DSI (Digital Stage Input) card, the
following additional settings and displays are provided.
Input controls for a DSI channel
Lock LED Indicates lock status for the channel, and mirrors
the same LED on the DSI card.
SRC Off Toggles Sample Rate Conversion on or off for that
channel, and mirrors the same LED on the DSI card. A lit SRC
Off switch indicates that SRC is disabled.
ADAT (Source) Enables the ADAT Optical port as the active in-
put source on the DSI card. When lit, the DSI card is clocking
and listening to corresponding ADAT input; when dark, the
channel is receiving input from the corresponding AES input.
Direct Outs are also available on DSI-fed channels, and their
pickoff point can be specified in the patchbay.

Using Input Direct

Input Direct mode lets you completely bypass the built-in dy-
namics and EQ processing, and all inserts on input channels
and FX returns. This mode routes the input signal directly
from the Top of Channel pickoff to the channel fader.
To bypass all processing on an input channel or FX return:
Target the channel by pressing its Select switch.
1
Go to the Inputs page.
2
Click the Input Direct button in the Config section of the In-
3
puts page for the selected channel. The button flashes to indi-
cate Input Direct mode is active.
Input Direct
Input Direct button
76 VENUE Profile Guide
Lock LED
SRC Off
Source