Adding Tempo Data To Snapshots - DigiDesign VENUE Profile Manual

Click Add and choose a message from the pop-up menu.
3
Adding a message to the Snapshot MIDI list
A MIDI plug icon appears in the Snapshots List for each snap-
shot that contains MIDI messages.
To record incoming MIDI data to a snapshot.
Click REC.
1
Send a supported MIDI command.
2
Click REC again when done.
3
To edit a MIDI message in the MIDI list:
Double-click the message text to display the pop-up menu
1
bar for the message.
Editing a MIDI message in the snapshot MIDI list
Choose the message name and send channel or device ID
2
from the pop-up menus.
Enter the message values in the text fields or drag up or
3
down across the text field to change the values.
Click in the MIDI list area to dismiss the pop-up menu bar.
4
To remove a MIDI message from a snapshot:
Right-click the MIDI message in the MIDI list and choose
Delete.
Viewing MIDI Messages in Hexadecimal
Format
You can toggle the view of MIDI messages in the MIDI list be-
tween hexadecimal and decimal formats.
To toggle the view format of the MIDI list:
Click the Hex button in the MIDI/Plug-Ins list header.
Safing MIDI Message Output
You can temporarily disable output of embedded MIDI mes-
sages so that they are not sent when a snapshot is recalled,
even when the MIDI data type is scoped.
MIDI output is automatically suspended while in Preview
mode.
To safe MIDI message output on-screen:
Go to the Snapshots page and click the Recall Safe tab.
1
Click the MIDI global output Safe button above the param-
2
eter matrix so that it is lit.

Adding Tempo Data to Snapshots

The Snapshots List can be toggled to display Tempo, along
with a Tempo On/Off indicator for each snapshot entry.
Snapshots List showing tempo
Storing a tempo with snapshots lets your system tempo
change per song or scene. This lets you take full advantage of
Tempo Sync (aka Tap Tempo) to synchronize delay and echo
plug-ins.
Displaying Tempo in the Snapshots List
To show Tempo in the Snapshots List:
Right-click anywhere in the Snapshots List and choose Show
Tempo.
Tempo is displayed in BPM (beats per minute) or milliseconds,
as set in the Options > Misc page.
To change the units for Tempo display:
Go to the Options > Misc page.
1
In the Tap Tempo section, click to select BPM or ms.
2
To sort items by tempo:
With Tempo shown in the Snapshots List, right-click and
choose Sort by Tempo.
Assigning and Enabling a Tempo
Each snapshot can store a custom tempo value. You can man-
ually enter a custom tempo, or use a shortcut to assign the cur-
rent System Tempo.
You can use the Tempo Enable icon to enable or disable tempo
recall when the associated snapshot is recalled.
Chapter 21: Snapshots 191