Chapter 29. Control Surface Reference; Venue Profile Console - DigiDesign VENUE Profile Manual

Chapter 29: Control Surface Reference
This chapter describes the ports and connectors on the VENUE Profile console.

VENUE Profile Console

USB port
Figure 20. VENUE Profile connectors
Top Panel USB Port
A USB 1.1 port is provided on the top panel, in the upper left
corner of the console. Use this USB port for iLok Smart Keys or
any other USB device such as a key disks.
For faster data transfer to and from USB storage devices, use
the USB 2.0 ports on the Mix Rack and FOH Rack.
Back Panel Connectors
Front USB Ports
Two USB 1.1 ports are provided on the front of console. Use
these ports to connect a USB keyboard and a Trackball (or
mouse). These ports also support iLoks and USB key disks.
Headphone Connector
The headphone connector on the front of the console is a
standard 1/4-inch stereo (TRS) headphone jack. The connec-
tor is fed by the Monitor bus.
USB (2) and Headphones
Chapter 29: Control Surface Reference 239
Talkback