Targeting Plug-In Inserts - DigiDesign VENUE Profile Manual

Multi-Assign
The Multi-Assign switch in the Output section is used to route
multiple channels to the selected output bus.
To assign one or more channels to an Aux, Group, or VCA:
Press one of the following switches in the Output Fader as-
1
signment section:
• Aux 1–8
• Aux 9–16
• Groups
• VCAs
Press the Multi-Assign switch near the Output encoders. The
2
flashing Multi-Assign switch and the banner display at the
lower left of the screen indicate Multi-Assign mode is enabled.
Press the Select switches on the channels you want to assign
3
to the Aux, Group, or VCA.
Select any other output to confirm the previous assignment
4
and proceed to assigning channels to the new selection. To
confirm the assignment and exit Multi-Assign mode, press the
flashing Multi-Assign switch.
To cancel the assignment do either of the following:
5
• Press the Cancel switch (in the Mute Groups/Function
section), or press the ESC key on your keyboard.
– or –
• Click Cancel in the on-screen Multi-Assign dialog box.
See Chapter 8, "Outputs and Output Routing."
Type Text Search
Type Text search lets you use the keyboard for fast navigation
to a channel, or to quickly go to a specific snapshot or event.
You can enter the first characters of a channel name or the ab-
solute channel number to target that channel on the ACS. (See
also "Selecting and Targeting Channels" on page 46.)
To search for and select a channel by name:
Go to the Inputs, Outputs, or Patchbay page.
1
Type the first few letters, channel number, or full name of
2
the channel. For example, type "s" to go to the first channel
beginning with the letter s (such as Snare).
Press the Tab key to cycle through and select any other
3
channels beginning with that letter (such as Snare Top, Snare
Bottom, or Strings).
To search for and select a list item by name (or number):
Go to the Snapshots, Events or Filing page. Or, click to open
1
any Presets window (built-in Dynamics or EQ presets, Input
Channel presets, or Scope Sets).
Type the first few letters or number of the desired item.
2
Press the Tab key to cycle through and select any other items
3
that begin with the same letters.
Channel Numbers and Names
VENUE SC48 channel numbers are "absolute" channel num-
bers. Renaming changes the displayed name associated with
each channel, but the absolute channel number remains
fixed.
To search for and select a channel by absolute number:
Type a number on the keyboard to select the corresponding
channel.
Type Text search can also be used to select snapshots and
events.

Targeting Plug-In Inserts

Selecting a single channel targets that channel in the ACS.
This lets you enable Inserts Mode to use the Output encoders
to adjust plug-ins inserted on that channel.
For more information, see See Chapter 18, "Plug-Ins."
Chapter 5: Navigating and Selecting Channels 47