DigiDesign VENUE Profile Manual page 205

Pan, Balance and Width Crossfade Reference
Pan, Balance and Width Crossfade Parameter Reference
Inputs† Input
Channel
FX Return
Output Aux
Mas-
PQ
ters††
Matrix
Groups
Variable Groups
† Crossfade does not apply to Pan for channel Aux sends.
†† Crossfade does not apply to Pan for input sources within the Matrix or PQ mixer.
Pre Settings
Snapshots can be used to recall the preamplifier settings on in-
puts for all scoped Input Channels. You can set any of the fol-
lowing Pre parameters to be recalled by the Pre data type but-
ton: Gain, Pad and Phase/polarity, +48V (Phantom Power),
HPF corner frequency and in/out state.
To set the Pre parameters recalled by the Pre Data Type button:
Go to the Options page and click the Snapshot tab.
1
Under Pre, select the options you want to include. Selected
2
items will be affected when the Pre data type is included in the
scope of a snapshot.
Setting Pre parameters
Pan
X
Mono
Stereo
Stereo
Mono/Stereo-linked
Mono/Stereo-linked
X
Mono
Stereo
X
Mono/Stereo-linked
Classifying Aux Sends
You can classify Aux Sends as monitor sends ("Mon") or as ef-
fects sends ("FX"), which lets you scope each type separately
from the Snapshots page.
To classify Aux Sends for snapshot scope:
Go to the Options page and click the Snapshots tab.
1
For each Aux Send bus or bus pair, click the Aux Mon or
2
Aux FX buttons to classify it as a monitor send or effects send,
respectively.
Classifying Aux Sends
Aux Pre/Post State
Select this option to include the pickoff point pre-fader or
post-fader state of each Aux Send in snapshots.
Balance Width
X
X
X
X
This option is only a means of organizing Aux Sends for
snapshot control, and does not directly affect Aux bus
operation.
X
X
X
Chapter 21: Snapshots 195