Dynamics Settings And Presets; Side-Chain Keys And Filters - DigiDesign VENUE Profile Manual

Dynamics Settings and Presets

Built-in Dynamics settings can be copied and pasted between
channels. Settings can also be stored, loaded, and transferred
as dynamics Presets.
Copying and Pasting Dynamics Settings
To copy and paste dynamics settings:
Right-click anywhere in the Comp/Lim or Exp/Gate areas of
1
the on-screen Dynamics section and choose Copy Comp/Lim
Settings, or Copy Exp/Gate Settings.
Copying dynamics settings
Go to the channel where you want to paste the settings.
2
Right-click in the Comp/Lim or Exp/Gate areas of the de-
3
sired channel's on-screen Dynamics section and choose Paste
Comp/Lim Settings or Paste Exp/Gate Settings.
To copy and paste all of a channel's built-in Dynamics settings:
Right-click in the on-screen Dynamics Graph and choose
1
Copy Dynamics Settings.
Select the channel where you want to paste the settings.
2
Right-click in the on-screen Dynamics Graph of the new
3
channel and choose Paste Dynamics Settings.
Presets for Built-In Dynamics
You can store and load settings as presets for built-in and
plug-in dynamics processors from the console or on-screen.
To save or load a preset:
Adjust dynamics settings on a channel (if saving a preset), or
1
select an input channel (to load a preset).
Click the Comp/Lim or Exp/Gate Presets icon on-screen.
2
Built-in dynamics Presets buttons
If necessary, select the appropriate Presets folder by clicking
3
and selecting it from the Folder selector.
Previewing a preset in the Presets window
Do one of the following:
4
• To preview an existing preset, click its name in the Presets
window.
• To load the currently selected preset, press Enter or click
the Close box (X) in the Presets window title bar.
• To save the current dynamics settings as a new preset,
click New and enter a name for the preset file.
• To cancel without changing settings, click Cancel.

Side-Chain Keys and Filters

The built-in Comp/Limiter and Exp/Gate support side-chain
triggering.
Key In/Out
The Key In switch toggles the key signal in or out of circuit for
the built-in Comp/Lim or Exp/Gate.
To toggle the side-chain key signal in or out of circuit, do one of
the following:
Click the Key In button in the side-chain controls of the
on-screen Dynamics section.
When the Comp/Limiter key is in, it uses its own source chan-
nel (Self) as the key source signal. When the Exp/Gate key is
in, it can be self-keyed or use any other available channel.
Presets Comp/Lim
Presets Exp/Gate
Presets Folder selector
Chapter 16: Dynamics 137