Chapter 26. Audio Specifications - DigiDesign VENUE Profile Manual

Chapter 26: Audio Specifications
VENUE Profile Console Audio Specifications
Internal Sample Frequency
External Sample Frequency
Processing Delay
Internal Processing
Frequency Response
THD + N
Dynamic Range
Maximum Voltage Gain
Crosstalk
Residual Output Noise
VENUE Profile Headphone Output
Connector
Output Impedance
Max RMS Power Output
(at +21 dBu:
VENUE Profile Talkback Mic Input
Connector
Phantom Power
Sensitivity (fixed)
Input Impedance
All specifications subject to change.
Mix Rack, FOH Rack, and Stage Rack For audio specifications
on Mix Rack, FOH Rack, or Stage Rack, see the guide that came
with that rack. If your racks include any VENUE expansion op-
tions, see the guide that came with each option.
48 kHz
48 kHz +/– 10 ppm (word clock input)
less than 2.8 ms (96 channels, stage input through L–R bus to stage output)
up to 48-bit, fixed point
288 dB internal dynamic range
+/– 0.5 dB (22 Hz – 20 kHz BW, relative to 1 kHz)
less than 0.01% Stage input to L–R bus, input gain @ min, –1 dBFS output,
20 Hz – 20 kHz BW
108 dB typ
84 dB (stage input to L–R bus, channel & L–R faders @ max)
–100 dB typ (Adjacent stage inputs to L–R bus, @ 1 kHz)
–90 dBu typ (22 Hz – 20 kHz BW)
1/4-inch TRS unbalanced
50 ohms
(with 32-ohm phones) 20 mW
(with 600-ohm phones) 130 mW
XLR3-F
+15V @ 6mA (always on)
–20 dBu
20K ohms
Chapter 26: Audio Specifications 225