Chapter 2. Installation; Installing Drawmer Dynamics; Authorizing Drawmer Dynamics - DigiDesign Drawmer Dynamics Owner's Manual

chapter 2
Installation

Installing Drawmer Dynamics

Installers for your plug-ins can be downloaded
from the DigiStore (www.digidesign.com) or can
be found on the plug-in installer CD-ROM (in-
cluded with boxed versions of plug-ins). Addi-
tionally, an installer may also be available on a
Pro Tools software bundle CD-ROM.
Installation steps are essentially the same, re-
gardless of the bundle, package, or system you
purchase.
Installation
To install Drawmer Dynamics:
Download and unpack the appropriate plug-
1
in installer from the Digidesign DigiStore
(www.digidesign.com), or insert the plug-in
installer CD-ROM into your CD-ROM drive.
Click Install.
2
When installation is complete, click Finish
3
(Windows) or Quit (Macintosh).
When you open Pro Tools, you will be
prompted to authorize your new plug-in.
Authorizing Drawmer
Dynamics
The Drawmer Dynamics plug-in is authorized
using the iLok USB Smart Key (iLok), manufac-
tured by PACE Anti-Piracy, Inc.
iLok USB Smart Key
The iLok is similar to a dongle, but unlike a don-
gle, it is designed to securely authorize multiple
software applications from a variety of software
developers.
This key can hold over 100 licenses for all of
your iLok-enabled software. Once an iLok is au-
thorized for a given piece of software, you can
use the iLok to authorize that software on any
computer.
The iLok USB Smart Key is not supplied
with your plug-in or software option. You
can use the one included with certain
Pro Tools systems (such as Pro Tools|HD-
series systems), or purchase one separately.
Chapter 2: Installation 5