Section 300~Installation
Wall-Mounting the Cabinet
Guidelines
Caution: Always turn the power switch OFF before beginning installa-
tion.
l
l
Installation
1. Remove the eight screws from the front and sides of the cabinet.
2. Take the front cover off by pulling it from the bottom and lifting it up.
3. Take the side covers off by sliding them up, then away.
Figure 3-1. Cover removal
DBS-70-300
The DBS is shipped with the cover installed to protect components. Before
wall-mounting the cabinet, remove the cover.
Handle the cabinet carefully to avoid damage.
Front Cover
DBS Manual - Issued 8/1'/95
Chapter 3. Cabinet Installation
3-3