Icom VE-PG2 Instruction Manual page 44

2
SELECTIVE CALL MODE APPLICATION
■ Using with a headset
S����� 5 S��������g ��h�� ��x�������l ���u�� v����� ���������l
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click �EXT Input (EXT IN) �EXT Input (EXT IN) EXT Input (EXT IN)�� shown on the list.
Set the power and input gain for the external headset.
• � Input gain (HW) �� selection may differ depending on the connected external devices.
• Set the � Input gain (HW) �� to � Maximum �� or � Minimum �� when the output signal from the
transceiver is too soft or too loud.
44
�Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then
Click to select �Standard��
option.
and then
Click �Enable.��
Standard�� ��