Icom VE-PG2 Instruction Manual page 75

ï VOX �������l ���������g
Set the VOX control setting for transceivers that are connected to the [TRX1]–
[TRX3] ports.
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click on one of the Transceiver ports, TRX1, TRX on one of the Transceiver ports, TRX1, TRX2 or TRX3 shown on the list.
q
w
e
r
t
y
u
i
VOX f�� PTT �������l
Set the VOX control settings for the transceivers that are connected to the [TRX1]–
[TRX3] ports to transmit when the VE-PG2 receives audio from the [LAN] port.
q A������k ������
Set the delay time for the VOX switch to turn ON after AF signals are received from
the [LAN] port.
(Default: 50)
(Selectable range: 5 to 500 (milliseconds), 5 milliseconds steps)
w R��l������ ������
Set the delay time for the VOX switch to turn OFF after AF signals are no longer
received from the [LAN] port.
(Default: 500)
(Selectable range: 5 to 2000 (milliseconds), 5 milliseconds steps)
e V����� ���l��
Set the AF signal buffer time to prevent broken audio.
(Default: 200)
(Selectable range: 0 to 500 (milliseconds), 5 milliseconds steps)
VE-PG2 SETTING SCREEN
�Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then
3
and then
1
2
3
4
5
6
7
8
9
10
11
75