Icom VE-PG2 Instruction Manual page 144

4
MAINTENANCE
■ H�w ��� ����������� �f ������� H�w ��� ����������� �f �������
If you set a new administrator password, you can restrict access to the VE-PG2
setting screen.
The default administrator password is �wavemaster.��
• The administrator ID is fixed at �admin.��
q Place the mouse pointer on �System setting,�� and then click �Administrator
w Input the �Current password,�� �New password�� and �Confirm password.��
• Input them less than 31 characters (Selectable from 0–9, a–z and A–Z).
e Click [Save].
r When the login dialog box is displayed, enter the login the ID (�admin��) and the
new password.
[NOTE]
If you forget the administrator password, hold down [INIT] for 5 seconds to reset
(initialize) the VE-PG2. (p. 148)
• When you reset (initialize) the VE-PG2, all settings are reset to the initial default values.
144
�System setting,�� and then click �Administrator System setting,�� and then click �Administrator ,�� and then click �Administrator �� and then click �Administrator then click �Administrator click �Administrator �Administrator.��
Enter the current password and
new passwords.
Click [Save].