Icom VE-PG2 Instruction Manual page 149

ï U���g ��h�� VE-PG2'� ���������g ��������
q Place the mouse pointer on �Maintenance,�� and then click �Initial setup
w Select either �All default setting�� or �Connection setting default setting�� in the
Initial setting menu.
e Click [BACK] after the initializing is complete.
[NOTE]
About the initializing condition
• When �All default setting�� is selected:
You can restore all the VE-PG2's settings.
The VE-PG2's IP address is set to �192.168.0.1,�� when initialized.
Set the PC's IP address to �192.168.0.xxx.�� (you can set xxx to any number from 2
to 254.)
• When �Connection setting default setting�� is selected:
You can initialize only the VE-PG2's �Connection setting�� items.
�Maintenance,�� and then click �Initial setup Maintenance,�� and then click �Initial setup ,�� and then click �Initial setup �� and then click �Initial setup then click �Initial setup
MAINTENANCE
click �Initial setup �Initial setup.��
Select either setting
4
Click
1
2
3
4
5
6
7
8
9
10
11
149