Firmware Updating - Icom VE-PG2 Instruction Manual

4
MAINTENANCE
■ Firmware updating (Continued)
ï U���g ��h�� VE-PG2 ���������g ��������
Place the mouse pointer on �Connection setting,�� and then click �Operating mode��
shown on the list.
If the [POWER] indicator lights orange, you can update the firmware from the
VE-PG2 setting screen.
• Save the VE-PG2 current setting to the PC before updating the firmware, if necessary.
• To use online firmware update, connect the VE-PG2 to internet, and set the VE-PG2's
�Primary DNS server,�� �Secondary DNS server�� and �Default gateway�� in �Network�� menu.
q Download a new firmware (extension is �.dat��) from Icom web site.
• We recommend that you save the current setting in the PC before updating the firmware.
w Place the mouse pointer on �Maintenance,�� and then click �Firmware update
e Click [Display] to confirm the new firmware information.
r Click [Firmware update].
• Depending on the update firmware, the VE-PG2's IP address may be reset to the default
setting (192.168.0.1). In such a case, set the PC's IP address to 192.168.0.xx (example:
192.168.0.10) to open the VE-PG2 setting menu and change the VE-PG2's IP address.
t Wait until updating the firmware is finished.
• The VE-PG2 accesses the Icom web site, and updates the firmware automatically.
• The VE-PG2 reboots automatically when firmware updating is completed.
152
�Connection setting,�� and then click �Operating mode�� Connection setting,�� and then click �Operating mode��
�Maintenance,�� and then click �Firmware update Maintenance,�� and then click �Firmware update ,�� and then click �Firmware update �� and then click �Firmware update
,�� and then click �Operating mode�� �� and then click �Operating mode�� �Operating mode�� Operating mode�� ��
then click �Firmware update click �Firmware update �Firmware update.��
Click
Click