Icom VE-PG2 Instruction Manual page 22

2
SELECTIVE CALL MODE APPLICATION
■ Using with in-house sound system
S����� 4 S��������g ��h�� ��x�������l ���u�� v����� ���������l
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click �EXT Input (EXT IN) �EXT Input (EXT IN) EXT Input (EXT IN)�� shown on the list.
Set the external input voice setting.
• � Input gain (HW) �� selection may differ depending on the connected external devices.
• Set the � Input gain (HW) �� to � Maximum �� or � Minimum �� when the output signal from the
external amplifier is too soft or too loud.
22
�Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then
Click to select �EXT
Output�� option.
Click to select �Always–on
connection�� option. �� option.
Click to select �Standard��
option.
• Click [Save] after setting.
and then
EXT
�� option.
Always–on
Standard�� ��