Icom VE-PG2 Instruction Manual page 79

w V�l�� ������g
Set the input AF signal's the available timing.
(Default: Control data detection)
•
Always-on connection : Always sends the AF signal to [Input connection port].
• AF input detection
• Control data detection : Sends the AF signal to [Input connection port] when detecting the
e P�w��� f�� ��h�� ������h����
Enable or disable the VE-PG2 to supply power to the external device.
(Default: Disable)
r I��u�� g��� (HW)
Set the audio volume level from the external device which is connected with the [IN]
port.
(Default: Minimum)
You can select from Maximum, Standard or Minimum.
• Normal input level is follow. (0dBs=0.775Vrms)
Maximum : –50dBs
Standard : –30dBs
Minimum : –10dBs
t I��u�� g��� (CODEC)
Set the audio volume level of the external device which is connected with the [IN]
port.
(Default: 0)
(Selectable range: –18 to +6 (dB), 1 dB steps)
VE-PG2 SETTING SCREEN
's the available timing. s the available timing.
If you set [Input connection port] to �Emergency,�� you can not select
this option.
: Sends the AF signal to [Input connection port] when the AF signal
are detected.
control signal.
3
1
2
3
4
5
6
7
8
9
10
11
79