Icom VE-PG2 Instruction Manual page 123

e V�IP ��g��l��g
Set the calling packets priority sending function.
• Priority: Set the TOS priority value.
(Default: 6)
(Select range: 0 to 7, 7 is highest priority.)
• Service type: Set the TOS service type field value.
(Default: 0)
(Select range: 0 to 15)
• DSCP: Set the DSCP (Differentiated Services Code Point) value.
(Default: 48)
(Select range: 0 to 63)
[H��x��������l �u�����l ����l����� wh��� TOS S����]
TOS is composed by 8 bits as follows:
1-3 bit : Priority value (Default: 111)
4-7 bit : Service type (Default: 0000)
8 bit : Not used (Fixed to �0��)
Default (1-8 bits) : 11100000 (Binary numeral), E0 (Hexadecimal numeral)
[H��x��������l �u�����l ����l����� wh��� D�ff����v S����]
TOS is composed by 8 bits as follows:
1-6 bit : DSCP (Default: 111000)
7, 8 bit : Not used (Fixed to �0��)
Default (1-8 bits) : 11100000 (Binary numeral), E0 (Hexadecimal numeral)
VE-PG2 SETTING SCREEN
3
1
2
3
4
5
6
7
8
9
10
11
123