Icom VE-PG2 Instruction Manual page 103

e
r
t
y
e C�����l ��ll
The VE-PG2's ability to cancel a call if the transceiver receives a call from the 's ability to cancel a call if the transceiver receives a call from the s ability to cancel a call if the transceiver receives a call from the
external device which is connected to the [IN] port.
(Default: Disable)
r P�w��� f�� ��h�� ������h����
Select to enable or disable power for the microphone.
(Default: Disable)
t I��u�� g��� (HW)
Set the input gain level of the received AF signal from the external device which is
connected to the [IN] port.
(Default: Minimum)
You can select from Maximum, Standard or Minimum.
• Normal input level is follow. (0dBs=0.775Vrms)
Maximum : –50dBs
Standard : –30dBs
Minimum : –10dBs
y I��u�� g��� (CODEC)
Set the input gain level of the received AF signal from the external device which is
connected to the [IN] port.
(Default: 0)
(Select range: –18 to +6 (dB), 1 dB steps)
• Could be to a transceiver, or to speakers, or to a repeater, whatever is connected to the
[OUT] port.
VE-PG2 SETTING SCREEN
3
1
2
3
4
5
6
7
8
9
10
11
103