Icom VE-PG2 Instruction Manual page 83

3-9 TRX/EXT EXT Ou���u�� (EXT OUT)
ï EXT v����� ���������l ���������g
Set the external equipment signal's audio level that comes from the [OUT] port, in
this screen.
Place the mouse pointer on �Connection setting,�� and then on �TRX/EXT,�� and then
click �EXT Output (EXT OUT) �EXT Output (EXT OUT)�� shown on the list.
q
w
q Ou���u�� g��� (HW)
Set the audio volume level of the external device which is connected to the [OUT]
port.
(Default: Minimum)
You can select from Maximum, Standard or Minimum.
• Normal input level is follow. (0dBs=0.775Vrms)
Maximum : 0dBs
Standard : –20dBs
Minimum : –40dBs
w Ou���u�� g��� (CODEC)
Set the audio volume level of the external device which is connected to the [OUT]
port.
(Default: 0)
(Selectable range: –18 to +6 (dB), 1 dB steps)
VE-PG2 SETTING SCREEN
's audio level that comes from the [OUT] port, in s audio level that comes from the [OUT] port, in
�Connection setting,�� and then on �TRX/EXT,�� and then Connection setting,�� and then on �TRX/EXT,�� and then ,�� and then on �TRX/EXT,�� and then �� and then on �TRX/EXT,�� and then
3
and then
1
2
3
4
5
6
7
8
9
10
11
83