Icom VE-PG2 Instruction Manual page 115

3-20 V�IP ��ll �������l T��������v��� 1 (TRX1) – T��������v��� 3 (TRX3)
ï V�IP ��ll �������l ���������g
Set the detailed settings for each transceiver connected to the [TRX1]–[TRX3] ports,
when it receives a signal.
Place the mouse pointer on �Connection setting,�� then on �VoIP call detail,�� and then
click on one of the Transceiver ports, TRX1, TRX2 or TRX3 shown on the list.
q
q S���� � �u������ful ������������ ������ ��� VE-PG2:
Select the desired notice tone type or �Not use.��
The selected notice tone sounds before the communication starts.
If �Not use�� is selected, no tone sounds. �Not use�� is selected, no tone sounds. Not use�� is selected, no tone sounds. �� is selected, no tone sounds. is selected, no tone sounds.
(Default: Not use)
Selectable from Not use, Notice tone 1 , Notice tone 2 or Notice tone 3.
w N������� ������ v�lu���:
Set the notice tone volume level.
(Default: 0)
(Select range: –18 to +6 (dB), 1 dB steps)
VE-PG2 SETTING SCREEN
w
�Not use.�� Not use.�� ��
3
1
2
3
4
5
6
7
8
9
10
11
115