Selecting Copy Paper - Lanier Copier System Edition Operating Instructions Manual

Selecting Copy Paper

Select the paper size for copying.
There are two ways to select copy paper:
❖ ❖ ❖ ❖ Auto Paper Select
The machine selects a suitable size of copy paper automatically based on the
original size and the reproduction ratio. ⇒ p.31 "Rotated copy"
❖ ❖ ❖ ❖ Manual Paper Select
Choose the tray containing the paper you wish to copy onto: A Paper Tray,
Bypass Tray or paper bank.
Limitation
❒ Auto Paper Select is applied to only the tray that is set to "Yes" in "Apply
Auto Paper Select", when setting "No Display" or "Recycled Paper" in "Pa-
per Tray" in the "Paper Settings". ⇒ "Paper Type : Tray 1-4", Administrator
Reference 2 Copier System Edition
❒ If you set all the paper trays to "No Display" or "Recycled Paper", you cannot
use Auto Paper Select.
Note
❒ See the following table for copy paper sizes and directions that can be used
with Auto Paper Select (when copying at a ratio of 100%).
❖ ❖ ❖ ❖ Metric version
Where Original Is Placed
Exposure glass
Optional document feeder (ADF)
❖ ❖ ❖ ❖ Inch version
Where Original Is Placed
Exposure glass
Optional document feeder (ADF)
❒ For some originals, the original size might not be detected correctly.
❒ When you load special paper, such as recycled paper, you can have the paper
type shown on the display. ⇒ "Special Paper Indication", Advanced Features
manual
Paper Size and Direction
A3L, B4L, A4KL, B5KL
A3L, B4L, A4KL, B5KL, A5KL, 8
× 13"KL, 8KL, 16KL
Paper Size and Direction
11" × 17"L, 8 " × 14"L, 8
1
/
2
A4K, 11" × 17"L, 8 " × 14"L, 8
1
/
2
US EXEL
Basic Functions
1
/ "
2
" × 11"KL
1
/
2
" × 11"KL,
1
/
2
29
1