Lanier Copier System Edition Operating Instructions Manual page 132

Possible Cause
Is the Data In indicator blinking
or lit after starting the print job?
When you use IEEE 1394 Inter-
face Unit Type1045
Operating Instructions
Network Connection
Contact your network administrator.
A
Confirm that the IEEE 1394 Interface Unit Type1045 is attached to the com-
puter correctly.
B
Confirm that the IEEE 1394 interface cable is connected securely.
C
Unplug the IEEE 1394 interface cable which is connected to the printer.
D
Restart the computer.
If the error occurs even after executing above operation, proceed to the fol-
lowing steps.
E
Execute the utility tool for IEEE 1394 Interface Unit Type1045 which is
stored in the following path in the CD-ROM labeled "Printer Drivers and Util-
ities".
UTILITY\1394
Important
For details about using the utility tool for IEEE 1394, see the RE-
ADME file in the same directory in the CD-ROM.
Maintenance Guide 2 Copier System Edition
Solutions
61