Lanier Copier System Edition Operating Instructions Manual page 120

Messages
Function Problem
Functional problem within the Copier
Turn main power switch off then on.
If the error appears again, call serv-
ice.
Fusing Oil Unit Replacement
Fusing oil is empty.
Open the part as shown and replace
Fusing Oil Unit.
Fusing Oil Unit Setting Error
Fusing Oil Unit is not set properly.
Open the part as shown and set the
unit.
Fusing Unit Replacement
Replacement of Fusing Unit is re-
quired.
Open the part as shown and replace
the unit.
Operating Instructions
Description
There is a problem with the machine
in the location indicated on the panel
display.
It is time to replace the fusing oil unit. Replace a fusing oil unit.
The fusing oil unit is not set correctly,
or is not set.
It is time to replace the fusing unit.
Maintenance Guide 2 Copier System Edition
Turn the main power switch off, and
then on five seconds later. If the mes-
sage appears again, contact your sales
or service representative.
Reference
Before turning the main pow-
er switch, see "Turning Off
the Main Power" in Adminis-
trator Reference 1.
Depending on your service contract,
contact your sales or service repre-
sentative.
See " Replacing Consumables and
Maintenance Kit " in Maintenance
Guide 1.
Set the fusing oil unit correctly.
See "Replacing Consumables and
Maintenance Kit" in Maintenance
Guide 1.
Replace a fusing unit.
Depending on your service contract,
contact your sales or service repre-
sentative.
See " Replacing Consumables and
Maintenance Kit " in Maintenance
Guide 1.
Solution
49