Stack - Lanier Copier System Edition Operating Instructions Manual

When placing a stack of originals
in the optional document feeder
(ADF)
A Place a stack of originals in the
o ption a l d oc um e n t f ee d e r
(ADF), and then press the
{ { { { Start} } } } key.
Note
❒ The last page should be on
the bottom.
❒ If an original is misfed dur-
ing sorted copying, reset
your originals in the optional
document feeder (ADF) ac-
cording to the instructions on
the display. The display will
i n d i c a t e t h e n u m b e r o f
scanned originals.
When placing an original on the
exposure glass or in the optional
document feeder (ADF) using
Batch mode
A Place the original, and then
press the { { { { Start} } } } key.
Note
❒ Start with the first page to be
copied.
B Place the next original, and
then press the { { { { Start} } } } key.
Note
❒ Place the original in the same
direction as the first one.
C After all originals are scanned,
press the { { { { #} } } } key.

Stack

The optional 2 Tray Finisher is required.
Copies can be put together with each
page placed. This function groups to-
gether copies of each page in a multi-
page original. Every other page stack
is shifted for ease of separation. The
shift tray of the optional 2 Tray Fin-
isher provides this function by sliding
from side to side.
Limitation
❒ You cannot use the Bypass Tray
with this function.
❒ You cannot use the following pa-
per with this function:
• OHP transparencies
• Thick paper
Note
❒ The paper sizes that can be used
with the Stack function are as fol-
lows:
Metric version
Inch version
Reference
For the maximum tray capacity of
the optional 2 Tray Finisher. ⇒
"Options", Administrator Refer-
ence 2 Copier System Edition
Sort/Stack/Staple
A3L, B4L,
A4KL, B5KL,
A5K
11" × 17"L, 8 " ×
1
/
2
" ×
1
14"L, 8 /
2
11"KL
1
47