Lanier Copier System Edition Operating Instructions Manual page 650

Problem
Copies are too light.
Parts of the image are not copied.
Copies are blank.
Operating Instructions
Cause
The image density is too light.
The paper size is not appropriate.
Toner cartridge is almost empty.
The original is not placed correctly.
An improper paper size is selected.
The original is not placed correctly.
Copy Reference <Advanced Features>
Solution & Reference
Adjust the image density.
ing Copy Image Density", Basic Fea-
tures manual
Use the recommended paper.
"Sizes and Weights Recommended
Originals", Maintenance Guide 1
Copier System Edition
Note
A light copy may result when
you use damp, rough grain or
coated paper.
Add toner.
Cartridge", Maintenance Guide 2
Copier System Edition
Place originals correctly.
Original", Basic Features manual
Select the proper paper size.
When using the exposure glass, face
the originals down. When using the
optional document feeder (ADF),
face them up.
on the Exposure Glass", Basic Fea-
tures manual
"Adjust-
"Replacing the Toner
"Placing
"Placing Originals
75