Lanier Copier System Edition Operating Instructions Manual page 172

R CAUTION:
• Protect the equipment from dampness or wet weather, such as rain, snow,
and so on.
• You should take care that the power cable will not be damaged under the
equipment.
• When you disconnect the power plug from the wall outlet, always pull the
plug (not the cable).
• Do not allow paper clips, staples, or other small metallic objects to fall in-
side the equipment.
• Do not eat or swallow toner.
• Keep toner (used or unused) and toner cartridge out of reach of children.
• For environmental reasons, do not dispose of the equipment or expended
supplies at a household waste collection point. Disposal should take place
at an authorized dealer or an appropriate collection site.
• Our products are engineered to meet the highest standards of quality and
functionality. When purchasing expendable supplies, we recommend using
only those specified by an authorized dealer.
• The inside of the machine becomes very hot. Do not touch the parts with a
label indicating a "hot surface". Touching a "hot surface" could result in a
burn. (v: means "hot surface".)
• To install this machine, contact your service representative. It can be dan-
gerous if electrical equipment is connected incorrectly.
• The service representative will install options. Do not loosen or remove any
screws used in the rack.
Note
• To move the machine, contact your service representative.
• The socket outlet on the back of the Scanner Unit is for the printer. Do not use
it for other equipment.
• Power Connection: 120 V, 60 Hz, 12 A or more (10A: Printer, 2A: Copier Sys-
tem)
• For safety information, see also the Setup Guide.
iii