Lanier Copier System Edition Operating Instructions Manual page 213

Combined Function Operations
When Scanning in the Copy or Document Server
During copying or scanning into the document server, you can use the following
procedure to interrupt the current job and make a copy.
Limitation
❒ During interrupt copying, you cannot perform another interrupt copying.
A A A A
Press the { { { { Interrupt} } } } key
If the machine is scanning originals, the scanning job will stop immediately
and the interrupt display will appear on the panel display.
B B B B
Remove the previous original and place the new original to be done by in-
terrupt copying.
4
C C C C
Press the { { { { Start} } } } key.
Interrupt copying starts.
D D D D
After interrupt copying is complete, remove the original and delivered cop-
ies.
E E E E
Press the { { { { Interrupt} } } } key again.
The display shown before interrupt copying started reappears.
F F F F
Replace the previous original, and then press the { { { { Start} } } } key.
The previous job settings will be restored and the machine will continue from
where it left off.
Printing with Copier, Document Server, Facsimile or Printer
During printing, you can use the following procedure to interrupt the current
job and make a copy.
A A A A
Press the { { { { Interrupt} } } } key.
The interrupt display appears on the panel display.
Note
❒ Printing does not stop yet.
B B B B
Place the originals used for interrupt copying, and then press the { { { { Start} } } }
key.
Printing stops and interrupt copying starts.
C C C C
When copying is complete, remove the originals and the copies.
D D D D
Press the { { { { Interrupt} } } } key.
The display shown before interrupt copying started reappears.
E E E E
Replace the previous original, and then press the { { { { Start} } } } key.
38