Lanier Copier System Edition Operating Instructions Manual page 331

Function Priority
You can specify the mode to be displayed immediately after the operation switch is turned on or
System Reset mode is turned on.
Note
Default: Copier
<F/F4> Size Settings
Currently three types of F size are available: 8
or exposure glass sensor cannot distinguish these three types of originals. This function sets the F
size for the document feeder or exposure glass sensor. Auto Paper Select or Auto Reduce/Enlarge
can be used for F size originals based on this setting. You'll find it very convenient to use the ma-
chine with the F size setting.
Note
1
Default: 8 / " 13"
2
Function Reset Timer
The length of time the machine waits before changing modes when using the multi-access function.
This is useful if you make many copies where you have to change the settings for each copy. If you
set a large value, you can prevent jobs from other functions interrupting the copy job.
Note
Default: Set Time
When you select "Set Time", enter the time (3 180 seconds by 1 second steps) with the number
keys.
The default time setting is 30 seconds.
Operating Instructions
1
/ " 13", 8
2
Administrator Reference 2
1
/ " 13", and 8" 13". The document feeder
4
102