Configuring the Network Interface Board
The Network Interface Board settings can be displayed and confirmed using the commands below.
• telnet : Use the show command.
Item name
Common
Mode
Protocol Up/Down
AppleTalk
TCP/IP
NetWare
NetBEUI
Ethernet interface
NVRAM version
Device name
Comment
Location
Contact
Soft switch
AppleTalk
Mode
Net
Object
Type
Zone
Operating Instructions
p.199 "Commands List"
Meaning
Up means active, Down means inactive.
Internal version number.
AppleTalk protocol in selection.
Network number.
Macintosh printer name.
The type of printer.
Name of the zone that the printer belongs to.
Administrator Reference 2
230