Specifying The Custom Paper Size For The Bypass Tray - Lanier 5222 Operator's Manual

pass Tray

Specifying the Custom Paper Size for the Bypass Tray

Using the Control Panel
1
Press {User Tools}.
2
Press {4} on the number keys.
3
Press [Up Arrow] or [Down Arrow] keys until "Job Control" appears, and then press
[Enter #].
4
Press [Up Arrow] or [Down Arrow] keys until "Paper Input" appears, and then press
[Enter #].
5
Press [Up Arrow] or [Down Arrow] keys until "Bypass Size" appears, and then press
[Enter #].
6
Specifying the standard size.
1. After confirming that "Standard Size" is displayed, press [Enter #] .
2. Press [Up Arrow] or [Down Arrow] keys until "Custom Size" is displayed, and
then press [Enter #] .
7
Specify the Custom Size.
1. Press [Up Arrow] or [Down Arrow] until "Custom Size" is displayed, press
Specifying the Custom Paper Size for the By-
7 - 13