Adjust Image - Lanier Copier System Edition Operating Instructions Manual

Adjust Image

Problem
In Double Copies mode, parts of the
original image are not copied.
In Border, Center, or Center/Border
mode, parts of the original image are
not copied.
In Margin Adjustment mode, parts of
the original image are not copied.
In Image Repeat mode, the original
image is not copied repeatedly.
Operating Instructions
Cause
Combination of original and copy pa-
per is not correct.
You set a wide erased margin.
Originals are not scanned correctly.
You set a wide erased margin.
There is a lack of margin space on the
opposite side of the binding position.
You selected copy paper the same
size as originals, or you did not select
the proper reproduction ratio.
Copy Reference <Advanced Features>
Solution & Reference
Select A3L for A4 originals K, and
A4 for A5 originals.
Make the margin width narrower.
You can adjust it between 2-
99mm. p.117 "Erase Original
Shadow in Combine",
Center Width"
Place the originals correctly.
Set a narrower margin with the User
Tools. You can change it between 0-
30 mm. p.115 "Front Margin:
Left/Right",
Left/Right",
Top/Bottom",
Top/Bottom"
Select copy paper larger than the
originals. Select the proper reproduc-
tion ratio.
p.117 "Erase
p.115 "Back Margin:
p.115 "Front Margin:
p.116 "Back Margin:
80