Netware 4.X, 5 - Advanced Settings - Lanier Copier System Edition Operating Instructions Manual

NetWare 4.x, 5 - Advanced Settings

The actual procedures for configuring the printer differ depending on whether the Network Interface
Board is configured as a print server or as a remote printer. This section describes how to configure it
in the NetWare 4.x, 5 environment.
To use NetWare 5
• If you use Pure IP, use the printer as a print server. You cannot use the printer as a remote printer
when you use Pure IP.
• If you use Pure IP, configure the printer to use the TCP/IP protocol. For more information about
how to make the settings, see "Configuring the printer for the Network" in Administrator Refer-
ence 1 that comes with this printer.
Operating Instructions Administrator Reference 2
51