Lanier Copier System Edition Operating Instructions Manual page 203

Getting Started
File Transfer Settings
Preparation
The File Transfer function requires the optional Hard Disk Unit.
The following describes the File Transfer settings required for sending received
facsimile files and sending scanned files using the Scanner function. For more in-
formation about the settings, see "User Tools (System Settings)" in Administra-
2
tor Reference 2 Copier System Edition.
A A A A
Press the { { { { User Tools/Counter} } } } key.
"User Tools/Counter" appears.
B B B B
Press [System Settings].
C C C C
Press [File Transfer].
The procedure after this varies depending on the items to be set. Refer to the
following procedures, and then make the necessary settings.
• Assigning a Delivery Server IP Address
• Making Settings to Transmit Received Facsimile Files
• Setting the Recall Interval Time
• Setting the Number of Recalls
Note
❒ After making necessary settings, go to step
28
D
.