Reception; Selecting The Reception Mode; Manual Reception; Auto Reception - Lanier Copier System Edition Operating Instructions Manual

Faxing

Reception

Selecting the Reception Mode

There are two ways you can set up
your machine to handle incoming
2
calls:
• Manual Reception (optional exter-
nal telephone or optional Handset
is required)

• Auto Reception

Manual Reception

When a telephone call comes in, the
machine rings. If the call is a fax mes-
sage, you must manually change to
facsimile mode.
Auto Reception
When a telephone call comes in, the
machine automatically receives it as a
fax message. Use this setting for a
dedicated fax line.
Limitation
❒ You cannot select the reception
mode when the optional Extra G3
Interface Unit is installed.
❒ The optional external telephone or
optional Handset is required to use
this machine as a telephone.
❒ You cannot select the reception
mode when you use an ISDN line.
44
- Receiving a Fax in Manual - - -
Reception Mode
A
When the machine rings, pick up
the handset of the external tele-
phone.
If you hear beeps, press the { { { { Start} } } }
B
key or the { { { { Start Manual RX} } } } key.
(The { { { { Start} } } } key is available in the
facsimile mode when an original is
not placed only.)
C Replace the handset of the external
telephone. The machine will start
receiving.