Scanning Originals - Lanier Copier System Edition Operating Instructions Manual

Scanning Originals

This section explains the method for scanning a single original following
A A A A
Start up DeskTopBinder V2 Lite and select the driver of the scanner.
A A A A Click [Start], point to [Program], and then [DeskTopBinder V2] from [DeskTopBinder V2].
DeskTopBinder V2 Lite starts up.
B B B B Click [Scanner Settings] from the [Tools] menu.
The [Scanner Settings] dialog box appears.
If the scanner is already selected, no scanner settings are necessary. Check [File format for
scanned image(s)] and go to step E.
C C C C Click [Select Scanner Driver].
The [Select Source] dialog box appears.
D D D D Click the machine name you want to use in the list, and then click [Select].
E E E E Click [OK].
The [Scanner Settings] dialog box closes.
B B B B
Place the original in the scanner.
Reference
p.53 "Setting Originals"
C C C C
Make the scan settings.
A A A A From the [File] menu, point to [Add Document], and then click [Scan].
The TWAIN driver starts up.
After a short while, the dialog box of the TWAIN driver that operates the scanner appears. This
dialog box is called the Scanner Control dialog box.
Operating Instructions Scanner Reference
p.63 "Flow of Operations".
64