Lanier Copier System Edition Operating Instructions Manual page 682

Change Initial Mode
You can select the standard mode or Program No. 10 as the mode effective when the machine is
turned on or modes are cleared.
Note
Default: Standard
Max. Copy Quantity
The maximum copy quantity can be set to 99.
Note
Default: 99 Sheets
Tone: Original remains
The beeper (key tone) sounds when you forgot to remove originals after copying.
Note
Default: ON
If the "Panel Tone" of the User Tools (System Settings) setting is "Off", the beeper does not
sound irrespective of the "Tone: Original remains" setting.
ence 2 Copier System Edition
Job End Call
You can choose whether or not the beeper sounds when copying is complete. If the "Panel Tone" of
the User Tools (System Settings) settings is "On", the machine beeps to notify you that the machine
did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper
or a paper jam occurred.
Note
Default: ON
Operating Instructions Copy Reference <Advanced Features>
"Panel Tone", Administrator Refer-
107