Control Panel - Lanier Copier System Edition Operating Instructions Manual

Control Panel

The illustration of the control panel will differ depending on the installed op-
tional unit. The following illustration has all the options installed.
{ { { { User Tools/Counter} } } } key
1.
User Tools:
Press to enter User Tools mode. These
tools allow you to customize the default
settings. ⇒ Chapter 7, "Facsimile Fea-
tures" in the Advanced Features manual
Counter:
Display and print the total number of
pages.
2.
Communicating Indicator
Lights during transmission or reception.
3.
Receive File Indicator
Lights when a message other than a Con-
fidential Reception or Memory Lock file
has been received. ⇒ Chapter 5, "Substi-
tute Reception" in the Advanced Fea-
tures manual
4.
Confidential File Indicator
Lights when a message has been received
into memory with Confidential Recep-
tion. ⇒ Chapter 3, "Printing a Confiden-
tial Message" in the Advanced Features
manual
Blinks when a Memory Lock file has been
received into memory. ⇒ Chapter 3,
"Printing a File Received with Memory
Lock" in the Advanced Features manual
5.
LCD display
This guides you through tasks and in-
forms you of the machine status. Messag-
es appear here. ⇒ p.9 "Reading the
Display"
{ { { { Start Manual RX} } } } key
6.
Press to start Manual Reception.
{ { { { Check Modes} } } } key
7.
Press this key before pressing the { { { { Start} } } }
key to check the settings selected for the
fax about to be sent.
{ { { { Program} } } } key
8.
Press to use the program function. ⇒
Chapter 6, "Programs" in the Advanced
Features manual
{ { { { Clear Modes} } } } key
9.
Press to cancel the current settings and
return to standby mode.
{ { { { Energy Saver} } } } key
10.
Hold down to enter Energy Saver mode.
{ { { { Interrupt} } } } key
11.
Press to interrupt the current fax opera-
tion in order to start copying.
12.
On indicator
This indicator goes on when the opera-
tion switch is turned on.
Control Panel
1
3