Changing The Line Type - Lanier Copier System Edition Operating Instructions Manual

Changing the Line Type

The optional ISDN Unit or Extra G3 Interface Unit is required.
When the optional ISDN Unit and Extra G3 In-
terface Unit are installed, you can connect to up
to a maximum of 2 lines.
Limitation
When sending a fax, you can select the line
type if dialing with the number keys or Chain
Dial.
Note
When you install the optional ISDN Unit or Ex-
tra G3 Interface Unit, you can specify the line
type home position from "Gen. Settings/Ad-
just". p.189 "General Settings/Adjustment"
Operating InstructionsFacsimile Reference (option) <Advanced Features>
G3
G3 is selected after power up or when the ma-
chine is reset. If you install Extra G3 Interface
Unit, you can select "G3-1" or "G3-2" de-
pending on the number of the installed unit.
93