Lanier Copier System Edition Operating Instructions Manual page 123

Messages
Paper in duplex unit.
Open cover and remove paper.
Paper in staple tray.
Open finisher cover and remove pa-
per.
Paper Misfeed
Paper was misfed at following point.
Open the part as shown and remove
it.
Paper remains on staple tray.
Remove it.
Paper size and type are mismatched.
Select another tray from followings
and press [Continue].
To cancel job, press [Reset]. Paper
size and type can also be changed in
User Tools.
Required:<xxx> <yyy>
Operating Instructions
Description
There is a misfeed in the Duplex Re-
versal Unit.
There is a misfeed in the optional 2
Tray Finisher.
There is a misfeed in the indicated
point.
There is still paper in the staple tray.
The paper size and the paper type set-
tings of the input paper tray are not
the same as those of the tray selected
by the printer driver, when Auto Tray
Select feature is on.
<xxx>: paper size
<yyy>: paper type
Maintenance Guide 2 Copier System Edition
Remove misfed paper.
See p.81 "When "Paper Misfeed: Z1"
Appears".
Open the finisher cover and remove
misfeed.
See p.76 "When "Paper Misfeed: R"
Appears".
Remove misfed paper.
See p.68 "Removing Misfed
Remove paper from the staple tray.
Load the required paper size and type
into the paper input tray.
Solution
Paper".
52