Troubleshooting; Loading Paper In The Main Paper Tray - Lanier 3730 Operating Instructions Manual

Loading Paper in the Main Paper Tray

If there is no paper in the main paper
tray, the B indicator on the control
panel lights.
Use the following procedure to load
the paper.
Important
❒ When loading paper, be careful
not to pinch your fingers inside the
machine.
❒ Before loading paper, make sure
that the machine is not outputting
a copy or received document.
Note
❒ Regarding paper types and sizes
that can be used, see p.124 "Pa-
per", Advanced Features.
❒ If you want to change the paper
size, see p.60 "Changing the Paper
Size Setting", Advanced Features.
A
Make sure that the main paper
tray is not being used.
B
Pull out the main paper tray until
it stops.
C
Push the metal plate down, and
then square the paper and load it
in the tray.

4. Troubleshooting

Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the main paper
tray and you add paper, a mis-
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
D
Push the main paper tray in until
it stops.
71