Manual Dial - Lanier Copier System Edition Operating Instructions Manual

Manual Dial

The external telephone or optional Handset is required.
Pick up the handset of the external telephone and
dial. When the line is connected and you hear a
high-pitched tone, press the { { { { Start} } } } key to send
your fax message. If, on the other hand, you hear
a voice at the other end, continue your conversa-
tion as you would normally over the telephone.
Limitation
Manual Dial does not work with ISDN lines.
This feature is not available for the optional
Extra G3 Interface Unit.
The result of a transmission with Manual Dial
is not mentioned in the Transmission Result
Report (Immediate Transmission).
Set originals on the exposure glass. The op-
tional Document Feeder (ADF) cannot be
used.
A A A A
Place your original, and then select any
scan settings you require.
Reference
Chapter 2, "Placing Originals" in the Ba-
sic Features manual
Chapter 2, "Scan Settings" in the Basic
Features manual
Operating InstructionsFacsimile Reference (option) <Advanced Features>
B B B B
Pick up the external telephone.
You will hear a tone.
C C C C
Dial.
The machine immediately dials the destina-
tion.
If you make a mistake, replace the external
telephone and try again from step
91
B
.