Lanier Copier System Edition Operating Instructions Manual page 446

Messages
Error: Parallel I/F Board
Full: Finisher
Full: Finisher Tray 1
Full: Finisher Tray 2
Full: Hole Punch Receptacle
Full: Mailbox
Full: Mailbox Tray 1
Full: Mailbox Tray 2
Full: Mailbox Tray 3
Full: Mailbox Tray 4
Full: Output Tray(s)
Full: Standard Tray
Operating Instructions
Description
An error has occurred in the parallel
interface board.
All output trays of the optional Fin-
isher are full.
Output tray 1 of the optional Finisher
is full.
Output tray 2 of the optional Finisher
is full.
Hole Punch Receptacle of the option-
al Finisher is full.
All output trays of the optional Mail-
box are full.
The output tray 1 of the optional
Mailbox is full.
The output tray 2 of the optional
Mailbox is full.
The output tray 3 of the optional
Mailbox is full.
The output tray 4 of the optional
Mailbox is full.
All output trays are full.
The standard tray is full.
Administrator Reference 2
Comments
First, turn the power switch off and
then on. If the message appears again,
call your sales or service representa-
tive.
Remove paper from the Finisher.
Remove paper from the Finisher.
Remove paper from the Finisher.
Remove Hole Punch Receptacle from
the Finisher.
Remove paper from the Mailbox.
Remove paper from the output tray 1
of the optional Mailbox.
Remove paper from the output tray 2
of the optional Mailbox.
Remove paper from the output tray 3
of the optional Mailbox.
Remove paper from the output tray 4
of the optional Mailbox.
Remove paper from all output trays.
Remove paper from standard trays.
217