Compatibility - ABB RCNA-01 User Manual

The module is equipped with two BNC contacts for connection to
ControlNet. If redundant operation is desired, both connectors are
used, otherwise connector A or B is used.
The module is also equipped with a NAP (Network access port) for
temporary connection of configuration tools, e.g. a PC card. The
minimum Network update time (NUT) of the module is 5 ms.
The adapter module is mounted into an option slot inside the
drive. See the Hardware Manual of the drive for module
placement options.
Scanner
Slave
stations
ABB Drive
ABB Drive
Figure 1. The construction of the ControlNet link and the layout of
the RCNA-01 Adapter module

Compatibility

The RCNA-01 is compatible with all scanners working according
to the ControlNet International ControlNet specifications.
Fixing screw
(frame)
(GND)
Network access port
Bus connectors
(Line A and B)
MacID
(node address selection)
switches
Diagnostic LEDs
(chapter Fault tracing)
Overview
17