Compatibility; Target Audience - ABB FSCA-01 User Manual

12 About the manual

Compatibility

The FSCA-01 RS-485 adapter module is compatible with the
following drives:
•
ACS355
•
ACSM1
•
ACH580
•
ACQ580
•
ACS580
•
ACS530
•
ACS850
•
ACS860
•
ACQ810
•
ACS880.
The FSCA-01 RS-485 adapter module supports the Modbus/RTU
communication protocol. Support for the DCP protocol to be used
with ACSM1 Lift control program is pending.
The FSCA-01 RS-485 adapter module is compatible with all
Modbus/RTU masters that support Modbus Application Protocol
Specification v1.1b and MODBUS over Serial Line Specification
and Implementation Guide v1.02.
Note: The adapter module is compatible with more drives that
may not be listed here. For details of compatibility, check the
drive's firmware manual.

Target audience

This manual is intended for people who plan the installation,
install, start up, use and service the adapter module. Before you
do work on the module, read this manual and the applicable drive
manual that contains the hardware and safety instructions for the
product in question.
You are expected to know the fundamentals of electricity, wiring,
electrical components and electrical schematic symbols.
The manual is written for readers worldwide. Both SI and imperial
units are shown.