Product And Service Inquiries; Product Training; Providing Feedback On Abb Drives Manuals - ABB RCNA-01 User Manual

RCNA-01 ControlNet Adapter module
The RCNA-01 Adapter module is one of the optional fieldbus
adapter modules available for ABB drives. The RCNA-01 is a
device through which an ABB drive is connected to a ControlNet
serial communication bus.
Output
In this manual, the word 'output' is used to describe data flow from
the ControlNet Scanner.
Parameter
A parameter is an operating instruction for the drive. Parameters
can be read and programmed with the drive control panel, or
through the RCNA-01 module.

Product and service inquiries

Address any inquiries about the product to your local ABB
representative, quoting the type code and serial number of the unit
in question. A listing of ABB sales, support and service contacts
can be found by navigating to
Sales, Support and Service network.

Product training

For information on ABB product training, navigate to
www.abb.com/drives

Providing feedback on ABB Drives manuals

Your comments on our manuals are welcome. Go to
www.abb.com/drives
feedback form (LV AC drives).
www.abb.com/drives
and select Training courses.
and select Document Library – Manuals
13
and selecting
Introduction