Table of Contents
Advertisement
Appendix B - Module configuration
backup
Contents of this chapter
This chapter presents the settings for FMBT-21 configuration backup.
Compatibility
FMBT-21 settings are stored in the drive parameters and also in the configuration
files. FMBT-21 adapter module supports backup of all settings to the drive. These
settings are now also included in any backups made of the drive using the Drive
composer PC tool or the control panel.
Settings for backup
Consider the following points:
•
Backup is not slot-specific. For example, backup of FMBT-21 in FBA A, slot 1 can
be restored to FMBT-21 FBA A, slot 2.
•
Backup depends on the fieldbus channel. For example, backup of FMBT-21 in FBA
A is not restored to FMBT-21 in FBA B.
•
FMBT-21 configuration parameters are included in the backup when drive
parameters are saved.
Configuration backup for all protocols in FMBT-21
￭
The settings are saved to the drive after 10 seconds. If a Refresh command is given
to FMBT-21 using parameter 51.27, the pending backup is transferred to drive
immediately and FMBT-21 is rebooted after the transfer is completed.
Appendix B - Module configuration backup 77
14
Advertisement
Table of Contents
