Status Print - Canon imagePROGRAF iPF6400S User Manual

Status Print

Status Print Status Print
You can print a Status Print report indicating the current status of the printer.
With Status Print, information is printed regarding the printer firmware version, various settings, and the status of con-
sumables.
Printing Status Print reports
1
Load paper.
When using sheets, load paper of A4/Letter size. You will need at least four sheets.
The required sheet quantity varies depending on the execution log quantity of unique calibration.
2
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-
lect Settings/Adj. tab (
•
Note
3
Press the OK button.
The Set./Adj. Menu is displayed.
4
Press ▲ or ▼ to select Test Print, and then press the OK button.
5
Press ▲ or ▼ to select Status Print, and then press the OK button.
Checking the information in Status Print reports
The following information is included in Status Print reports.
Canon imagePROGRAF iPFxxxx Status Print
Firm
Boot
MIT(DBF)
MIT(DB)
S/N
Date
Paper Menu
Paper Type
ManageRemainRoll
Keep Paper Type
644
Job Menu
Job Log
).
If the Tab Selection screen is not displayed, press the Menu button.
Roll Media
Cut Sheet
Printer model
Firmware version
Boot ROM version
MIT database format version
MIT database version
Printer serial number
Indicates when the status print report was printed.
Information on the loaded paper.
Job-related information.
A counter for maintenance purposes.
iPF6400S
User's Guide